Default Credentials for Hikvision Cameras
Hikvision is a popular name on the field of surveillance cameras and security products. If you want to configure a Hikvision IP Camera at the very first time, it would be good to know its default setting on the first step to access to it. What is talking about are the default IP, username, password and port for Hikvision security camera and in this article there are all information.
Hikvision Default IP
Normally the default IP address used with all Hikvision camera is 192.168.1.64. The IP address above is used for the access to the camera's interface and configuration in it. Make sure that your computer is in the same sub network and have an IP addresses like 192.168.1.x in order to connect to camera.
Hikvision Default Username
The default username to log in to a Hikvision camera is admin. Most cameras have a default username for the administrative account. You will use this name when you initially set up the camera and want to log in to its web interface.
Hikvision Default Password
In old versions Hikvision cameras came with default password which was 12345. Due to security issue new Hikvision cameras ask for new password setup during first access of camera. If it's a new Hikvision camera then setup new password.
Hikvision Default Port
Hikvision's camera is set by default at the http port (port 80). It is possible to access web interfaces on this port. If it is being occupied or for security reasons, change the port to something different on the cameras network settings.
In summary, when configuring a Hikvision camera for the first time, you will need the following default settings:
- Default IP: 192.168.1.64
- Default Username: admin
- Default Password: (create upon initial setup)
- Default Port: 80
It will configure the required ports of your Hikvision camera. This settings can be done only if you change the default password when set up.
