AJAX Camera: Default IP, Username, Password, Port
AJAX cameras are commonly used in small offices, homes, and private facilities where users want a simple but dependable video monitoring solution. Many models in the AJAX lineup come with built in web interfaces that require logging in through a browser. To access the menu, change settings, or perform the first configuration after installation, you often need the factory default IP address and the initial login credentials. Understanding these defaults helps you prepare the camera for network use, improve security, and troubleshoot issues that may appear after a reset or firmware update.
Default IP Address
Most AJAX cameras use a standard private address so that the device can be accessed directly during the initial setup. The most common default IP is 192.168.1.10, which matches the addressing format used in many home routers. If you connect the camera to a network that uses DHCP, the camera may receive a different address automatically. In such a case you can find the active IP through your router's client list or by using a local network discovery tool.
Default Username
The typical default username for AJAX cameras is admin. This simple value is chosen to make the first login quick and uncomplicated. Some older units may not require a username at all, but most modern models follow the admin pattern and prompt for a login name before granting access to the configuration panel.
Default Password
AJAX cameras usually ship with admin as the default password. In some versions the password field may be empty on the very first login until the user defines a new one. If the camera refuses the password, it likely means the value was changed by a previous user or during a setup wizard. Resetting the device to factory settings will restore the default password, allowing you to sign in again.
Default Port
These cameras typically run their web interface on port 80, which is the standard HTTP port used by most network devices. Some models support optional secondary ports like 8080 for video streams or mobile access, depending on the firmware and user settings. If you cannot access the camera through port 80, the port might have been changed manually. Performing a reset will restore port 80 as the primary access point.
Connect AJAX cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
