Anran Camera: Default IP, Username, Password, Port

Cameras 8 minutes

Anran cameras are widely used for home and business surveillance due to their affordability, reliable image quality, and ease of installation. Whether you are setting up a new Anran IP camera or troubleshooting connection issues, knowing its default network credentials is crucial. These details allow you to access the camera interface, configure network settings, and integrate it into your security system smoothly.

Default IP Address

The default IP address for most Anran cameras is 192.168.1.10. This address allows direct access to the camera’s web interface when connected to the same local network. If your router uses a different subnet, the camera may not appear immediately — so you might need to adjust your computer’s IP settings temporarily or use Anran’s software to locate the camera automatically. It’s always a good idea to change the IP to a static one after setup to prevent disconnection when the router reassigns addresses.

Default Username

Anran cameras typically use admin as the default username. This administrative account provides full access to all camera settings, including network configuration, video quality adjustments, and firmware updates. For security reasons, it is strongly recommended to create a new user account with a strong password after the initial login.

Default Password

In most Anran camera models, the default password is left blank, meaning you can log in by simply leaving the password field empty. However, newer models may prompt you to create a password upon the first login to enhance security. After accessing the camera for the first time, it’s essential to set a secure password that combines letters, numbers, and symbols to prevent unauthorized access.

Default Port

The default port for Anran IP cameras is 80, which is used for web access through a browser. Some models also use additional ports such as 554 for RTSP streaming and 8000 for mobile app connections. If remote access is required, you may need to forward the port in your router settings. Changing the default port to a custom one can also improve security by reducing exposure to automated scans.

Connect Anran cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How can I reset my Anran camera to factory settings?

To reset an Anran camera, hold down the reset button for about 10–15 seconds while the camera is powered on. This will restore the default IP, username, and password, allowing you to set up the device again from scratch.

What should I do if my Anran camera is not showing on the network?

If your camera does not appear on the network, ensure it’s powered correctly and connected via Ethernet. Then, use Anran’s search tool or network scanning software to detect the device. You can also try connecting it directly to a PC using the default IP address.

Can I change the default login credentials of my Anran camera?

Yes. Once logged in with the default credentials, go to the “User Management” section and create a new username and password. This helps secure your device from unauthorized access, especially when the camera is accessible over the internet.

How do I access my Anran camera remotely?

To access your camera remotely, enable port forwarding for the camera’s IP and port number in your router settings. Then, use your external IP address or a DDNS service to connect from outside your local network.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo