Comelit Camera: Default IP, Username, Password, Port

Cameras 8 minutes

When setting up a new Comelit IP camera, the first step is to log into its web interface. This allows you to configure network settings, video quality, and security options. Like most professional security camera systems, Comelit cameras come with factory defaults for their IP address, username, password, and port number. These defaults are designed to make the initial connection easy, but it is strongly recommended that users change them immediately after installation to protect against unauthorized access. Below, you will find the most common default details for Comelit cameras and useful information to get started.

Default IP Address

Comelit IP cameras typically ship with a default IP address of 192.168.1.108. This address is set by the manufacturer so that the camera can be discovered on a local area network. To access the camera, your computer must be within the same subnet, for example 192.168.1.50. Once logged in, you should assign a unique IP address for each camera to prevent conflicts if multiple devices are connected to the same network.

Default Username

The default username for most Comelit cameras is admin. This account provides full access to all system settings, including network configuration, video streams, and user management. Additional accounts with restricted permissions can be created once the initial setup is complete, which is useful if multiple people will need access.

Default Password

The default password is usually admin or in some cases left blank. This is intended only for the first login and should never be kept as-is for long-term use. Leaving the default password unchanged can make your camera an easy target for cyberattacks. As soon as you gain access, create a strong password that includes a mix of numbers, letters, and symbols.

Default Port

By default, Comelit cameras use port 80 for HTTP web access. This is the same as most network devices. If you plan to view your camera remotely over the internet, you may need to configure port forwarding on your router. For better security, many installers recommend changing the port number from 80 to a non-standard option or enabling HTTPS through port 443 if supported by the model.

Connect Comelit cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How do I change the default IP address on my Comelit camera?

You can change the default IP address by logging into the web interface using the factory settings. Once logged in, go to the network settings menu and assign a new static IP address that matches your local network configuration.

What should I do if I forget the password for my Comelit camera?

If you forget the password, you will need to reset the camera to factory settings. This usually involves pressing and holding the reset button on the device for about 10–15 seconds until it reboots. Afterward, the default credentials will be restored.

Can I access my Comelit camera remotely?

Yes, Comelit cameras support remote viewing through web browsers, mobile apps, or NVR systems. To enable this, configure port forwarding on your router or use a cloud-based service provided by the manufacturer. For safety, always use a strong password and encrypted connection.

Why is it important to change the default login details on my Comelit camera?

Default usernames and passwords are widely known and can be exploited by hackers. Changing them immediately after installation helps secure your network and prevents unauthorized access to your video feeds.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo