Eyemax Camera: Default IP, Username, Password, Port
Wirepath cameras are popular in both home and business security systems because they provide reliable video surveillance with remote access options. Like most IP cameras, they come with default network settings that allow installers and users to quickly configure the device. Knowing the default login details and port information can help you set up or troubleshoot your Wirepath camera without unnecessary delays.
Default IP Address
When shipped from the factory, Wirepath cameras usually come with a preset IP address. This is often set to a common private network range such as 192.168.1.108. If your network uses a different range, you may need to adjust your computer’s IP settings temporarily to access the camera and then reconfigure the camera to match your local network.
Default Username
The default username for most Wirepath cameras is typically admin. This account has full access privileges, which means it can change video settings, adjust network configurations, and manage user accounts.
Default Password
The factory default password is also commonly set to 12345 or left blank on some older models. If the password field is blank, simply leaving it empty at login should grant access. For security reasons, it’s strongly recommended to change this password during the initial setup to prevent unauthorized access.
Default Port
By default, Wirepath cameras use port 80 for HTTP access. This allows users to log into the camera interface via a standard web browser. If you are setting up remote access through a router, you may need to forward port 80 (or a custom port if changed) to reach the camera from outside your local network.
Connect Eyemax cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
