IQeye Camera: Default IP, Username, Password, Port

Cameras 8 minutes

IQeye cameras are widely recognized for their robust performance and reliability in security and surveillance systems. Whether you are setting up a new installation or troubleshooting an existing network, knowing the default network settings of your IQeye camera can save time and prevent connectivity issues. This guide covers the default IP address, username, password, and port, providing the essential information you need to get your camera up and running.

Default IP Address

Most IQeye cameras come pre-configured with a default IP address to simplify initial setup. The standard default IP for these cameras is 192.168.1.10. This allows users to access the camera’s web interface for configuration without needing to know advanced networking. If your network operates on a different IP range, you may need to adjust your computer’s IP settings or use the camera’s configuration software to assign a compatible address.

Default Username

To log in to your IQeye camera for the first time, the default username is typically admin. This account provides full administrative access, allowing you to configure video settings, user permissions, and network options. It is highly recommended to change this username or create additional accounts to enhance security after the initial setup.

Default Password

The default password for IQeye cameras is generally admin. Using this password, combined with the default username, grants access to the camera’s complete interface. For security reasons, it’s crucial to replace the default password with a strong, unique password to prevent unauthorized access, especially if the camera is connected to the internet.

Default Port

IQeye cameras use port 80 as the default port for HTTP access. This is the standard web port, allowing you to view the camera through a browser interface. Some installations may require changing the port to avoid conflicts with other devices on the network or to improve security by using a non-standard port.

Connect IQeye cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How do I reset my IQeye camera to default settings?

To reset an IQeye camera, locate the reset button on the device. Press and hold it for about 10–15 seconds while the camera is powered on. The camera will restart with factory default settings, including the default IP, username, and password.

Can I access my IQeye camera remotely?

Yes, IQeye cameras can be accessed remotely by configuring port forwarding on your router or using a VPN connection. Make sure you change the default password before enabling remote access to maintain security.

What should I do if the default IP doesn’t work?

If the default IP does not allow access, check for IP conflicts or ensure your computer is on the same subnet. You can also use IQeye’s configuration software to scan the network and identify the camera’s current IP address.

Are there different default settings for various IQeye models?

While many IQeye cameras share the same default IP, username, and password, some models may vary slightly. Always refer to the specific camera’s user manual for exact default settings if the standard credentials do not work.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo