IRLAB Camera: Default IP, Username, Password, Port
Setting up IRLAB cameras for the first time requires knowing the factory-default network settings and login credentials. These details are essential to access the camera’s web interface, configure the device, and connect it to a security system. If you are installing a new IRLAB camera or restoring one to factory defaults, the information below will help you quickly establish a connection.
Default IP Address
Most IRLAB cameras are preconfigured with the default IP address 192.168.1.10. This allows users to directly connect the camera to a local network or computer using an Ethernet cable. If your network uses a different subnet, you may need to manually change your computer’s IP settings to match the camera’s range before accessing it.
Default Username
The default username for IRLAB cameras is typically admin. This account has full administrative rights, allowing users to adjust network parameters, video settings, and security options. For security reasons, it is recommended to change the default username after the first login.
Default Password
By default, the password is usually set to 12345. This is a common setting across many professional surveillance systems. Users should replace the default password with a strong and unique one to protect the camera from unauthorized access.
Default Port
The default HTTP port for IRLAB cameras is 80. This is the standard port for accessing the web interface via a browser. If you plan to make the camera accessible over the internet, you may need to configure port forwarding and, for security reasons, consider changing the default port to a custom value.
Connect IRLAB cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
