Vanderbilt Camera: Default IP, Username, Password, Port
Vanderbilt cameras are part of the company’s wider security and access control solutions, trusted by businesses and institutions for reliable video surveillance. Like other IP-based security devices, Vanderbilt cameras come with default network settings that simplify the initial installation process. These default credentials are essential for first-time setup and can also be useful when performing a factory reset. However, for security reasons, they should always be updated once the camera is configured.
Default IP Address
The default IP address for most Vanderbilt IP cameras is 192.168.1.100. This address allows direct access to the camera’s web interface when the camera and computer are connected to the same local network. If the IP address has changed due to DHCP settings, users can locate the camera using Vanderbilt’s device discovery tool.
Default Username
The default username for Vanderbilt cameras is typically admin. This account provides full administrative access to all settings, including network configuration, video streams, and user management.
Default Password
The default password is usually 1234. Some models may prompt users to create a new password at first login for added security. It is strongly recommended to change the default password immediately after installation to protect against unauthorized access.
Default Port
The standard HTTP port used by Vanderbilt cameras is 80. For remote access setups, administrators often change this to an alternate port, such as 8080 or higher, to enhance security and reduce the likelihood of conflicts with other services.
Connect Vanderbilt cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
