VIDEOTEKNIKA Camera: Default IP, Username, Password, Port

Q: What should I do if the default IP address does not work?

If 192.168.1.108 does not respond, the camera may have obtained an IP from your router via DHCP. Use the manufacturer’s search tool or check your router’s client list to locate the camera.

Q: Can I change the default port 80 to another port?

Yes, the HTTP port can be changed in the camera’s network settings to avoid conflicts or improve security.

Q: Why is it important to change the default password on my VIDEOTEKNIKA camera?

Default credentials are publicly known and can be exploited. Changing the password prevents unauthorized access to your security system.

Cameras 7 minutes

VIDEOTEKNIKA Camera: Default IP, Username, Password, Port

VIDEOTEKNIKA cameras are widely used for professional security surveillance in commercial, industrial, and residential applications. Like many IP camera systems, they come with default network and login settings that simplify the initial setup process. Knowing these defaults can help installers and users quickly connect to the camera’s interface and configure it for their specific security needs. However, for security reasons, it is always recommended to change these settings after the first login.

Default IP Address

By default, VIDEOTEKNIKA cameras are configured with the IP address 192.168.1.108. This allows direct connection to a computer or router within the same subnet. If the network does not use this IP range, the address may need to be adjusted using the manufacturer’s configuration tool or via manual setup.

Default Username

The default username for VIDEOTEKNIKA cameras is admin. This account provides full access to all camera settings and features, making it essential to secure this account after installation.

Default Password

The default password is admin. Since this password is common across devices, it poses a potential security risk if not changed. Users are strongly advised to set a strong, unique password immediately after the first login.

Default Port

VIDEOTEKNIKA cameras typically use 80 as the default HTTP port for accessing the camera’s web interface. Some models may also use additional ports for services such as RTSP streaming or remote management, which can be customized in the settings if needed.

Connect VIDEOTEKNIKA cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How do I reset my VIDEOTEKNIKA camera to factory defaults?

To reset a VIDEOTEKNIKA camera, press and hold the reset button (usually located near the network port) for about 10–15 seconds. This restores the default IP, username, password, and port settings.

What should I do if the default IP address does not work?

If the default IP address 192.168.1.108 does not respond, the camera may have obtained an IP address from your router via DHCP. Use the manufacturer’s device search tool or check your router’s client list to find the assigned address.

Can I change the default port 80 to another port?

Yes, you can change the default HTTP port in the camera’s network settings. This is useful for avoiding conflicts with other devices or enhancing security by using a non-standard port.

Why is it important to change the default password on my VIDEOTEKNIKA camera?

Default credentials are widely known and can be exploited by unauthorized users. Changing the password significantly reduces the risk of unauthorized access to your surveillance system.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo