Zmodo Camera Default Login Credentials
Zmodo IP cameras are one of the most popular options on the market thanks to their low price, simple installation process, and general user-friendliness. While the traditional NVR security system tended to use static login details, Zmodo has already shifted toward cloud-based access and app-based setup, but there are still many users searching for default login information when adding the cameras in a browser, third-party program, or NVR.
Default IP
Zmodo cameras typically do not use a fixed default IP address. Instead, they request an IP automatically from your router using DHCP. This means the address changes depending on your local network setup. To locate your camera’s current IP, you can:
- Open your router settings and check the connected devices list
- Use the Zmodo mobile app to view device details
- Run a network scanner to detect active devices
Some older Zmodo models may briefly use a fallback IP such as 192.168.1.1 or 192.168.0.1 during initial setup, but this is not consistent across all devices.
Default Username
Many Zmodo cameras have a default username for local access that is not complex, especially on older versions of the firmware. Usually the default username is the following value: admin.
This is good if your new camera allows you to create an account and login in the setup process. It is bad if the camera saves a username to a user account instead of a generic login. Usernames tied to a Zmodo cloud account can't be logged in locally.
Default Password
The default password for Zmodo depends on the model and firmware. These are some of the more prevalent past models (on older hardware): admin or (blank password).
Register for the first time Newer Zmodo cameras ask users to register a password when they set up for the first time. In the event you experience login problems, attempt the typical defaults only if the device is not configured. Otherwise, a factory reset may be needed.
Default Port
Zmodo cameras use several ports depending on the connection method and features enabled. Typical ports include:
Some models limit direct port access to improve security, especially those designed for cloud-only operation. If you plan to use third-party software, check whether RTSP or ONVIF is supported on your specific camera.
Connect Zmodo cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
