Advik Camera: Default IP, Username, Password, Port

Q: How do I reset my Advik camera to factory settings?

To reset an Advik camera, press and hold the reset button for about 15 seconds while the device is powered on. Once it restarts, all settings will return to factory defaults.

Q: What should I do if I can’t access my Advik camera using the default IP?

If the camera does not respond to 192.168.1.108, use the Advik network tool or an IP scanner to find the correct address. Ensure your computer is on the same local network.

Q: Can I change the default username or password on my Advik camera?

Yes. Changing the default username and password immediately after setup improves security and prevents unauthorized access to your camera.

Q: What ports should I open for remote access to my Advik camera?

Open port 80 for web access and port 37777 for data communication. For better security, change these ports to custom values and use HTTPS where available.

Cameras 8 minutes

Advik Camera: Default IP, Username, Password, Port

Advik cameras are known for their reliability, sharp image quality, and ease of use in both residential and commercial security systems. These devices are designed to integrate seamlessly with modern NVRs and IP-based networks, making them a flexible choice for professional surveillance installations. Like most IP cameras, Advik devices come with preset default credentials and network settings to simplify initial setup and troubleshooting. Understanding these details is essential for installers and users who want to access or configure their cameras for the first time.

Default IP Address

The default IP address for most Advik cameras is 192.168.1.108. This address allows direct access to the camera from a local network before it’s assigned a new IP by your router. To connect, your computer should be on the same subnet, for example, 192.168.1.x. If the camera doesn’t respond at that address, you can use the Advik Config Tool or similar software to scan your local network and locate the device. Once identified, it’s best practice to change the IP address to match your network’s configuration and avoid address conflicts.

Default Username

The default username for Advik cameras is usually admin. This is the main account with full privileges to adjust all camera settings, from video encoding and motion detection to network configuration. After logging in for the first time, users are strongly encouraged to create additional accounts with limited permissions for daily use, keeping the admin account secure for system management only.

Default Password

The default password is either admin or left blank (no password) depending on the model and firmware version. Some newer Advik cameras will prompt users to create a strong password during the first login for security purposes. If your device still allows login without a password, it’s crucial to set one immediately — preferably with a mix of uppercase, lowercase, numbers, and symbols — to prevent unauthorized access, especially if the camera will be viewable remotely.

Default Port

Advik cameras commonly use port 80 for HTTP web access and port 37777 for TCP data communication. Port 80 is used to open the camera interface in a web browser, while port 37777 handles the communication between the camera and the NVR or monitoring software. For remote viewing, you may need to forward these ports in your router settings. To enhance security, users can modify these port numbers in the network settings menu, minimizing exposure to unwanted access attempts.

Connect Advik cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How do I reset my Advik camera to factory settings?

To reset an Advik camera, locate the small reset button, usually positioned near the power or network connection. Hold it down for about 15 seconds while the device is powered on. When it restarts, all settings — including IP, username, and password — will return to factory defaults.

What should I do if I can’t access my Advik camera using the default IP?

If the camera doesn’t respond at 192.168.1.108, it might have received a dynamic IP from your router. You can use the Advik network tool or a generic IP scanner to locate the camera’s current address. Make sure your computer is connected to the same local network.

Can I change the default username or password on my Advik camera?

Yes. It’s recommended to change both the username and password as soon as the camera is set up. Doing so helps secure your system and reduces the risk of unauthorized access, especially when the camera is connected to the internet.

What ports should I open for remote access to my Advik camera?

Typically, you’ll need to open port 80 for web access and port 37777 for data transmission. However, it’s safer to change these ports to unique numbers and enable HTTPS if supported, providing an additional layer of protection.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo