Anxinshi Camera: Default IP, Username, Password, Port
Anxinshi cameras are part of a broad ecosystem of affordable IP-based surveillance devices widely used in homes, offices, and small businesses. They combine accessible design with a relatively simple configuration process, making them a popular option among users who prefer self-managed CCTV systems. Like most network cameras, Anxinshi devices rely on specific default settings for first-time setup — these include a preassigned IP address, login credentials, and a communication port used to transmit video and control data over the network. Understanding these defaults is essential to get the camera online quickly and to secure it properly afterward.
Default IP Address
Most Anxinshi IP cameras use 192.168.1.10 as the default IP address. This address allows users to access the camera through a web browser or the manufacturer’s configuration software when the device is connected to the same local network. If your router assigns a different subnet, you may need to adjust the IP range manually to ensure communication. Once you log in for the first time, it’s advisable to change the default IP or switch the device to DHCP mode so the router automatically assigns an address.
Default Username
The default username for most Anxinshi cameras is admin. This account grants full administrative privileges, including control over network settings, video resolution, recording schedules, and remote access permissions. Because all Anxinshi units ship with the same admin username, anyone on the same network could theoretically attempt to access the device if the password remains unchanged. Changing or disabling the default account is therefore a critical step for network security.
Default Password
The default password is usually left blank or set to admin, depending on the camera’s firmware version. While this simplifies initial setup, it also exposes the system to unauthorized access if not changed immediately. Once the camera is operational, users should set a strong password containing a mix of letters, numbers, and symbols. Many recent models also prompt users to update the password automatically during the first login to reduce security risks.
Default Port
Anxinshi cameras typically use port 34567 for data communication and video streaming. This port supports both TCP and UDP connections, allowing live video feeds and remote control commands to pass between the device and connected apps. Some models may also use port 80 for web access or port 554 for RTSP streaming. If you plan to monitor the camera remotely, you’ll need to forward the corresponding ports in your router settings — but be sure to enable encryption and authentication features to minimize vulnerabilities.
Connect Anxinshi cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
