GW Camera: Default IP, Username, Password, Port
GW cameras are widely used for home and business security due to their reliability and clear image quality. Setting up these cameras for the first time can be challenging if you don’t know the default access settings. Knowing the default IP address, username, password, and port is essential for configuring the camera, accessing its web interface, or connecting it to a network video recorder (NVR). This guide provides all the information needed to get started quickly with GW cameras.
Default IP Address
The default IP address of most GW cameras is usually 192.168.1.108. This private IP allows the camera to communicate with your local network and be accessed through a web browser or management software. If your network uses a different range, you might need to adjust your computer’s network settings temporarily to reach the camera.
Default Username
GW cameras typically use admin as the default username. This is the standard administrative account that allows full control over the camera’s settings, including video resolution, motion detection, and network configuration.
Default Password
The default password for GW cameras is often set as 12345 or left blank, depending on the model. For security reasons, it is highly recommended to change this password during the initial setup to prevent unauthorized access.
Default Port
The default HTTP port for GW cameras is 80, which allows access via a standard web browser. Some models may also use 37777 as a TCP port for connection through software or mobile apps. If port conflicts occur with other devices on the network, the ports can be changed in the camera’s settings.
Connect GW cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
