Homaxi Camera: Default IP, Username, Password, Port

Cameras 7 minutes

Homaxi security cameras are widely used for both home and business surveillance thanks to their reliability and ease of use. Like most IP cameras, they come with factory-set login details that allow users to access the device for the first time. Knowing the default IP address, username, password, and port is essential for initial setup, troubleshooting, and restoring access if login details are forgotten. Below, we explain the default settings you need to know before configuring your Homaxi camera.

Default IP Address

Homaxi cameras typically use 192.168.1.64 as the default IP address. This allows the camera to be detected within the same local network. If the camera does not appear, you may need to use the manufacturer’s configuration tool or adjust your router’s settings to ensure the device is connected.

Default Username

The default username for most Homaxi cameras is admin. This account has full access to the system and is required for the initial login. It is highly recommended to change this after setup to prevent unauthorized access.

Default Password

By default, the password is usually 12345 or may be left blank depending on the model and firmware version. On first login, many Homaxi cameras will require you to set a new password for security reasons. Always choose a strong password that combines letters, numbers, and symbols.

Default Port

The standard default port for Homaxi cameras is 8000. This port is used for communication between the camera and connected devices such as NVRs, mobile apps, or remote viewing software. If you are setting up remote access, you may need to forward this port in your router settings.

Connect Homaxi cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

What should I do if my Homaxi camera’s default IP address doesn’t work?

If the default IP address 192.168.1.64 is not responding, check whether your computer is on the same network segment. You can also use the Homaxi configuration tool or a network scanner to detect the camera’s active IP.

Can I reset my Homaxi camera if I forget the password?

Yes, most Homaxi cameras have a physical reset button. Holding it for about 10–15 seconds will restore the device to factory settings, including the default username and password.

How do I change the default port of my Homaxi camera?

You can change the port by logging into the camera’s web interface or configuration software. This is often done to avoid conflicts with other devices or to enhance security when setting up remote access.

Is it safe to keep the default username and password on my Homaxi camera?

No, it is not safe. Keeping factory settings makes your camera vulnerable to unauthorized access. Always update the login credentials during the initial setup.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo