i3 International Camera: Default IP, Username, Password, Port
i3 International is a trusted name in video surveillance solutions, widely used in retail, commercial, and industrial environments. Their cameras and NVR systems are designed for professional security applications, offering reliable performance and advanced features. Like most network-based security devices, i3 International cameras are shipped with factory-set login credentials and network settings. Understanding these default values is crucial for initial setup, troubleshooting, or regaining access after a reset.
Default IP Address
By default, most i3 International cameras use the IP address 192.168.1.108. This allows the camera to be discovered on the same local network. If the camera does not appear during setup, you may need to run the manufacturer’s discovery tool or temporarily adjust your computer’s network settings to be on the same subnet.
Default Username
The default username is usually admin. This account provides full system access and is needed to log into the camera for the first time. For security reasons, it is strongly recommended to create a new administrator account or update the default credentials immediately after setup.
Default Password
The password for i3 International cameras is often admin or sometimes left blank, depending on the model and firmware. Upon the first login, the system will typically prompt you to set a new, stronger password to ensure protection against unauthorized access.
Default Port
The default communication port used by i3 International cameras is 8000. This port is required for the connection between the camera, NVR, and any remote viewing software. If you plan to enable remote access through the internet, you may need to configure port forwarding on your router to ensure proper connectivity.
Connect i3 International cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
