Illumivue Camera: Default IP, Username, Password, Port
When setting up an Illumivue camera for the first time, you’ll need the factory default login information to access the system. These details are important because they allow you to connect the device to your network, adjust settings, and begin recording. Many installers and users run into difficulties at this stage if they do not know the default credentials. Below, we’ll cover the default IP address, username, password, and port used by Illumivue cameras, along with some helpful tips to make installation smoother.
Default IP Address
Illumivue cameras typically come with the default IP address 192.168.1.108. This makes it easier to detect the device on a standard local network. If your router uses a different range of addresses, you may need to temporarily set your computer’s IP to the same range in order to reach the camera. Once connected, it’s best practice to change the IP address so that it matches your network and avoids conflicts with other devices.
Default Username
The default username for most Illumivue cameras is admin. This is the account you’ll use the first time you log into the camera. Because it is a widely known default, creating a unique username after setup is strongly recommended to strengthen security.
Default Password
The password that comes preset on Illumivue cameras is usually 123456. In some cases, the camera may ask you to set a new password upon the first login, depending on the firmware version. If the default password does not work, performing a factory reset should restore it. For security, always replace the default password with a strong and unique one as soon as possible.
Default Port
Illumivue cameras use port 80 by default. This is the standard port used for web access through a browser. Some models may also support RTSP streaming, which generally uses port 554. If you are planning to connect remotely, you might want to change the HTTP port from the default setting, as leaving it unchanged can expose the camera to unnecessary risks.
Connect Illumivue cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
