SONITROL Camera: Default IP, Username, Password, Port

Q: What should I do if my SONITROL camera’s default login doesn’t work?

If the default username and password do not work, they may have been changed previously. You may need to reset the camera to factory settings or contact the system administrator.

Q: Can I connect SONITROL cameras directly to the cloud?

SONITROL cameras integrate with SONITROL’s monitoring platforms but can also be configured for cloud access depending on the service used.

Q: How do I reset a SONITROL camera to factory settings?

Most models have a reset button that must be pressed for several seconds while powered on, restoring the default IP, username, and password.

Q: Is it safe to use the default port for SONITROL cameras?

The default port works, but it is safer to change it to a non-standard port to add extra protection against unauthorized access attempts.

Cameras 7 minutes

SONITROL Camera: Default IP, Username, Password, Port

SONITROL cameras are widely used in security systems because of their strong integration with intrusion detection and video monitoring. Like most network cameras, they come with default login details that allow users or installers to access the system for the first time. Understanding these factory settings is important if you are setting up the camera or troubleshooting access issues.

Default IP Address

Most SONITROL cameras ship with a preset IP address so they can be discovered on a network during installation. In many cases, this address is set to 192.168.1.168 or a similar private IP range. Installers can change this address to match the local network structure once the camera is connected.

Default Username

The default username for SONITROL cameras is often set to admin. This gives the installer full access to the camera’s configuration settings, including video quality, network setup, and recording preferences.

Default Password

By default, the password is typically 12345 or left blank, depending on the model. For security reasons, it is strongly recommended to change this immediately after installation. Leaving the default password in place exposes the system to unauthorized access.

Default Port

SONITROL cameras generally operate over port 80, which is the standard port for HTTP connections. In some cases, depending on the system configuration, port 554 may also be used for RTSP streaming. Installers can reconfigure these ports to fit specific network requirements.

Connect SONITROL cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

What should I do if my SONITROL camera’s default login doesn’t work?

If the default username and password do not work, it’s possible that they were changed during a previous setup. You may need to reset the camera to factory settings or contact the system administrator for access.

Can I connect SONITROL cameras directly to the cloud?

SONITROL cameras are designed to integrate with SONITROL’s monitoring platforms, but they can also be configured for cloud access depending on the service used. Check whether your provider supports direct cloud recording and remote access.

How do I reset a SONITROL camera to factory settings?

Most models include a reset button that must be pressed and held for several seconds while the camera is powered on. This action restores the default IP, username, and password. Refer to the model-specific manual for the exact reset process.

Is it safe to use the default port for SONITROL cameras?

While the default port works, it is generally safer to change it to a non-standard port. This adds an extra layer of protection against unauthorized attempts to access the system over the internet.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo