Turing Camera: Default IP, Username, Password, Port

Cameras 8 minutes

Turing cameras are modern surveillance devices designed to deliver high-quality video monitoring for both residential and commercial environments. They come with advanced AI features, remote management capabilities, and secure cloud integration. However, to get them up and running, it is important to know the default network settings such as the IP address, username, password, and port. These details allow users to access the camera’s interface for the first time, configure settings, and ensure smooth operation.

Default IP Address

Most Turing cameras are set to automatically obtain an IP address through DHCP, which means your router assigns the camera an available address. However, if the camera does not connect through DHCP, the fallback default IP is usually 192.168.1.108. This address can be entered into a web browser to reach the camera’s login page, provided your computer is on the same network segment.

Default Username

The default username for Turing cameras is typically admin. This account gives full access to the system and is required for the first login. It is highly recommended to change or create additional user accounts to improve security once the initial setup is complete.

Default Password

For security reasons, Turing cameras do not usually come with a universal static password. In many cases, the default password may be left blank, or the system may prompt the user to create a new one during the initial setup. Some models use a unique password printed on the camera’s label or generated by the manufacturer. Always replace it with a strong, custom password to prevent unauthorized access.

Default Port

The default HTTP port for Turing cameras is usually 80, which allows access via a web browser. Some models may also use port 554 for RTSP streaming and port 8000 for additional management functions. These ports can be customized in the camera’s network settings if needed, especially when setting up remote access through port forwarding.

Connect Turing cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

How do I find my Turing camera’s IP address if DHCP is enabled?

You can check your router’s connected devices list, use the Turing mobile app, or run a network scanner to identify the IP assigned to your camera.

What should I do if I forget my Turing camera password?

If you forget the password, you may need to perform a factory reset. This typically involves holding down the reset button on the camera for several seconds until it reboots, restoring default settings.

Can I change the default port on my Turing camera?

Yes, you can change the HTTP and RTSP ports in the camera’s network configuration menu. This is useful for avoiding conflicts or setting up secure remote access.

Are Turing cameras secure with default login settings?

No, it is not secure to keep the default username and password. Always update your login credentials after the initial setup to protect against unauthorized access.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo