WBox Camera: Default IP, Username, Password, Port
WBox cameras are widely used in commercial and residential security systems for their balance of affordability and performance. Whether you are setting up a new camera or troubleshooting an existing one, knowing the default login details and port settings is essential for quick access. Below you will find the default IP address, username, password, and port information for WBox cameras, along with answers to common questions that new users often ask.
Default IP Address
WBox cameras usually come with a default IP address that allows you to connect the device to your local network for the first time. The default IP address is typically 192.168.1.108. You can enter this into your browser’s address bar to access the camera’s login page. If the camera is connected to a different network range, you may need to use a network scanning tool to find its current IP.
Default Username
The default username for most WBox cameras is admin. This account provides full access to the system settings, enabling you to configure the device according to your needs. It is strongly recommended to change the username if the camera is deployed in a sensitive environment.
Default Password
By default, WBox cameras use 12345 as the password. Some newer models may not have a set password at first login and will require you to create a custom one during setup. For security reasons, it is always advised to change the password immediately after installation.
Default Port
WBox cameras typically use 80 as the default HTTP port. This port is required to access the camera interface through a web browser. For remote access or advanced setups, you may also encounter other ports, such as RTSP (554) for streaming or HTTPS (443) for encrypted connections. Changing these ports can help improve security and avoid conflicts with other devices on the same network.
Connect WBox cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
