Zosi Camera: Default IP, Username, Password, Port
Zosi IP cameras are often chosen for home and small business surveillance because they offer a balance between price and functionality. Many systems are sold as complete kits with NVRs, but standalone IP cameras are also common. When setting up or troubleshooting, users frequently look for default credentials to access the camera interface or connect it to third party software. Zosi devices follow a mix of traditional and newer security approaches, so understanding how default login details work can help avoid confusion during installation.
Default IP
Zosi IP cameras usually do not rely on a fixed default IP address. Like most modern devices, they obtain an IP automatically from the router using DHCP. This means the camera will appear under a dynamic address such as 192.168.0.x or 192.168.1.x depending on your network.
- Check your router's device list to find the assigned IP
- Use Zosi Smart or AVSS software to detect the device
- Scan the network with a discovery tool if needed
Some older models or factory reset devices may briefly use a fallback IP like 192.168.1.10, but this is not guaranteed and varies by firmware.
Default Username
Zosi cameras commonly use a standard username for initial access, especially on older models. The most typical default username is: admin.
In newer firmware versions, the system may prompt you to create or confirm login details during the first setup. When connected through an NVR, the username is often managed directly by the recorder rather than the camera itself.
Default Password
The default password for Zosi IP cameras depends on the device generation. Common options include:
- admin
- 123456
- (blank password)
Many newer Zosi devices require you to set a password during the initial configuration, which improves security. If you cannot log in, try the common defaults only if the camera has not been configured before. Otherwise, a factory reset is required to restore access.
Default Port
Zosi cameras support several ports depending on the connection type and features enabled. Typical defaults include:
When using an NVR, these ports are often handled automatically, so manual configuration may not be necessary. For remote viewing or third party integration, you may need to adjust port forwarding settings in your router.
Connect Zosi cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
