ACTi Camera: Default IP, Username, Password, Port

Cameras 10 minutes

ACTi IP cameras are widely used in professional surveillance systems due to their reliability, image quality, and advanced network features. Whether you are setting up a new device or trying to regain access to an existing one, knowing the default credentials is essential. This guide covers the standard login details for ACTi cameras, along with practical tips and frequently asked questions to help you avoid common issues during setup.

Default IP

Most ACTi IP cameras ship with a predefined IP address to make initial access easier. The commonly used default IP is: 192.168.0.100.

Keep in mind that your network must be in the same IP range to access the camera directly. If your router uses a different subnet, you may need to temporarily adjust your computer’s IP settings or use ACTi’s utility software to discover the device.

Default Username

The default username for ACTi IP cameras is: admin.

This username is case-sensitive, so be sure to enter it exactly as shown. Some newer firmware versions may require you to create a new username during the first login instead of using a preset one.

Default Password

ACTi cameras are typically configured with the following default password: 123456.

In certain models or updated firmware versions, the password field may be left blank during the first login. For security reasons, users are often prompted to set a strong password immediately after accessing the device.

Default Port

The default communication port used by ACTi IP cameras is: 80.

This port is used to access the web interface via a browser. If the port has been changed, you will need to include it in the address bar, for example: 192.168.0.100:8080.

Connect ACTi cameras to VXG Cloud VMS with GenAI for free

Learn more

FAQs

Why can't I access my ACTi camera using the default IP?

This usually happens when your computer is on a different network range. Adjust your PC’s IP address to match the camera’s subnet or use a device discovery tool to find the correct IP.

What should I do if the default password does not work?

The password may have been changed during setup. Try leaving the password field empty or perform a factory reset to restore default settings.

How do I reset an ACTi IP camera?

Locate the reset button on the device, press and hold it for about 10 to 15 seconds while the camera is powered on. This will restore factory settings, including login credentials.

Can I change the default port?

Yes, you can change the HTTP port in the camera settings. This is often done for security reasons or to avoid conflicts with other devices on the network.

Is it safe to keep default credentials?

No, keeping default credentials is a security risk. Always change the username and password after the first login to protect your camera from unauthorized access.

Why is my browser not showing the camera interface?

Modern browsers may block plugins required for older camera interfaces. Try using a compatible browser or update the camera firmware to a newer version that supports standard web technologies.

How can I find my ACTi camera on the network?

You can use ACTi’s official search tool or check your router’s connected devices list. These methods help identify the camera’s current IP address quickly.

Cloud VMS with GenAI

for Security, VSaaS, VMS,
Telecom

Cloud storage
Generative AI
Fully scalable
White-label

Get demo