Raysharp Camera: Default IP, Username, Password, Port
Raysharp cameras are widely used in security systems for both residential and commercial applications. To set up or troubleshoot these cameras, it’s essential to know the default network settings that allow you to access the device. Whether you are configuring the camera for the first time or restoring it after a reset, understanding the default IP address, username, password, and port is the first step to successfully connecting the system.
Default IP Address
Raysharp cameras typically use 192.168.1.10 as the default IP address. This means that if the camera has not been configured before, you can connect it directly to your computer or local network and use this address in a browser to access the login page. If you cannot reach the device, ensure your PC is set within the same subnet, such as 192.168.1.x.
Default Username
The default username for Raysharp cameras is usually admin. This is the primary account that provides full access to the camera’s settings, live video stream, and configuration tools. It is recommended to change this username or at least the password once the system is installed to prevent unauthorized access.
Default Password
In most cases, the default password is 123456 or sometimes left blank depending on the model. If you are setting up the camera for the first time and cannot log in, try using both options. After gaining access, create a strong and unique password to secure your surveillance system.
Default Port
The default communication port for Raysharp cameras is typically 80, which is the standard HTTP port used to access the camera interface via a web browser. Some models may also use port 554 for RTSP streaming or port 37777 for video management software. If the default port does not work, check your specific model’s manual or reset the device to factory settings.
Connect Raysharp cameras to VXG Cloud VMS with GenAI for free
Learn moreFAQs
